5 Channel Amplifier with an Electronic Digital Pre-Amp & Top Mounted LCD Panel
Innovative and Korean made, DPA premium digital amplifiers bring a new approach to traditional sound processing. Tune precisely with push buttons to shift between settings, a single rotary confirmation dial shows tuning values in real-time on the top-mounted LCD screen. Accuracy and a stylish advantage to precise tuning car amplifiers again!
DPA models include a Monoblock, four-channel, and five-channel solution. Tuning full features such as subsonic frequencies, crossover points, bass boost value, and operating voltage and temperature on the top-mounted LCD panel. Included quick disconnect RCA inputs can be cut and hardwired for hi-level signal sensing input for OE systems.
Features include variable high-pass, low-pass, and bandpass filters, along with a variable bass boost and phase control. All setting are made by button and confirmed on the digital display. The high- and low-pass filters have vast ranges (20-20K Hz) and steep slopes (48 dB/octave) to accommodate the widest variety of different tweeters, speakers, and subs you might use in your system. A wired remote lets you control the bass level from your front seat.
Are you using an original or factory radio? No problem, these amplifiers are equipped with an Automatic Hi-Level Signal Sensing Turn-On. There is no need to run a remote wire turn on; this amplifier will automatically detect the sound signal and turn on and off the amplifier. (Hi-Level Input only)
Top-Mounted LCD Screen | Included |
RMS Power @ 4Ω | 75W x 4 + 200W |
RMS Power @ 2Ω | 125W x 4 + 400W |
RMS Bridged @ 4Ω | 250W x 2 + 400W (2Ω) |
Product Highlights:
- • 5-channel Premium Amplifier
- • Class-D Amplifier Technology
- • Front and Rear Channels:
- • variable high- and low-pass filters (20-20K Hz, 48 dB/octave)
- • bandpass setting engages both high- and low-pass filters
- • Subwoofer channel:
- • variable low-pass filter (20-1000 Hz, 48 dB/octave)
- • variable subsonic filter (10-50 Hz, 48 dB/octave)
- • variable bass boost (0-14 dB at 45 Hz)
- • variable phase control (0-180°)
Other Features:
- • Wired remote level control for subwoofer channel included
- • RCA and Speaker-Level inputs
- • Fuse rating: 20A x 3
- • Dimensions: 4″W x 1.75″H x 11.5″L
- • 2-ohm Stereo & 4-ohm Bridged Impedance Stability
- • Automatic Turn-On Hi-Level Signal Sensing
- • Direct Short, Thermal, & Overload Circuits Protect Amplifier
- • Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
- • 250mV – 8V High-Level Speaker Input or Low-Level RCA Input
Inside the Box:
- • 5-Channel Amplifier
- • Owners Manual
- • (2) 8″ Line level input harnesses
- • 8″ Speaker output harness
- • Wired Remote Bass Knob w/18ft Cable